Kuvaus
Tool trolley BASIC with 7 drawers and end cabinet, 358 parts. Drawer 1 contains 1/4" socket short 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14mm, long 4-5.5-5-5, 5-6-7-8-9-10-11-12-13mm, socket short 10-11-12-13-14-15-16-17-18-19mm, long 8-10- 11-12-13-14-15-16-17-18-19mm. 1/2", socket short 10-11-12-13-14-15-16-17-18-19-20-21-22-24-27-30-32mm, long 10-13-15-19- 22-24mm. Cardan joint 1/4-3/8-1/2". Extends 1/4"x100mm, 3/8"x150mm, 1/2x125mm. Ratchet wrench 1/4-3/8-1/2" 72 teeth. Drawer 2 contains bits 8mm 30mm long, notches 8-10-12mm, Ph3-4, Pz3-4, 6edge 7-8-10-12-14mm , Torx 40-45-50-55-60-70, Torx tamper with hole 40-45-50-55-60-70. 1/4" Pin socket notches 4-5.5-6.5-7mm, Ph0- 1-2-3, Pz0-1-2-3. XZN M8-M10-M12. 6ct. 3-4-5-6-7-8mm. Torx 8-9-10-15-20-25-27-30-40, Torx tamper with hole 8-9-10-15-20--25-27-30-40. Torx 5 edge TS with holes 10-15-20-25-27-30-40-45-50. 1/2" Pin socket Torx 40-45-50-55-60-70x140mm, 6edge 10-11-13x140mm, 14-17-19-22-24x55mm. XZN M10-12-14-16x140mm, Bits adapter 8mm x 1 /2". Pneumatic top M18x78mm, power socket 6edge 5-6-8-10-12-14-17-19mm Torx 30-40-45-50-55-60-70-80. Drawer 3 contains ring spanners 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-23-24-27-30-32mm. Drawer 4 contains hammer 300g, mandrel 1.5-2-3-4-5-6mm, water pump pliers 250mm, combination pliers 175mm, needle-nose pliers straight 150mm, needlenose pliers curved 150mm, side cutter 150mm, locking ring pliers straight 2 pcs. locking ring pliers curved 2 pcs. Drawer 5 contains screwdrivers 4x100mm 5x75mm, 6x100mm, 8x150mm, Ph1x75, Ph2x100mm, Ph3x150mm. Jewelers screwdriver notches 3x75mm, 2.5x100mm, Ph0x100mm. Torx 9-10-15-20-25-27-30-40, bit screwdriver and 49 piece bit set. Drawer 6 contains ring spanners equal to 10-13-15-17-19mm, spanner sets etc. with ball 1.5-10mm, spanner set empty with ball 1/16" - 3/8", spanner set Torx 10-50, power tips 1/2" short 10-11-13-15-17-19-21-22- 24mm, long 10-11-13-15-17-19-21-22-24mm, extends 75-125-250mm, cardan joint.
Nouda PDF-versio